Driver Tablet Wolder Mitab Diamond
Driver Tablet Wolder Mitab Diamond ->>> https://urluso.com/2tzQPN
How to Download and Install Driver for Wolder Mitab Diamond Tablet
If you own a Wolder Mitab Diamond tablet and want to connect it to your Windows computer, you will need to download and install the appropriate USB driver. The USB driver allows you to transfer data between your tablet and your computer, as well as flash or install the stock firmware on your tablet using the preloader drivers.
In this article, we will show you how to download and install the official Wolder USB driver for your Mitab Diamond tablet. We will also provide you with the link to the stock firmware ROM for your tablet, in case you need to restore or update your device.
Step 1: Download the Wolder USB Driver
The first step is to download the Wolder USB driver for your Mitab Diamond tablet from the link below. The driver is compatible with all Windows versions from XP to 10. The file size is about 451 MB and it contains the driver, the flash tool, the instruction manual and the stock firmware ROM.
Download Wolder USB Driver for Windows
Step 2: Extract the ZIP File
After downloading the ZIP file, you need to extract it to a folder on your computer. You can use any file extraction software like WinRAR or 7-Zip. You will get four files: Wolder_Mitab_Diamond_4.1_RK.zip, SP_Flash_Tool_v5.1824_Win.zip, DriverAutoInstaller_v1.1236.00.zip and Manual.pdf.
Step 3: Install the Driver
The next step is to install the driver on your computer. To do this, you need to run the DriverAutoInstaller_v1.1236.00.exe file as an administrator. Follow the on-screen instructions to complete the installation process. You may need to restart your computer after installing the driver.
Step 4: Connect Your Tablet to Your Computer
Now that you have installed the driver, you can connect your Wolder Mitab Diamond tablet to your computer using a USB cable. Make sure your tablet is powered off and has enough battery charge. You should hear a sound or see a notification on your computer indicating that your device is connected.
Step 5: Flash or Install the Stock Firmware
If you want to flash or install the stock firmware on your tablet, you need to use the SP Flash Tool. To do this, you need to extract the SP_Flash_Tool_v5.1824_Win.zip file and run the flash_tool.exe file as an administrator. Then, you need to load the scatter file from the Wolder_Mitab_Diamond_4.1_RK.zip file by clicking on the Choose button under Scatter-loading File.
After loading the scatter file, you will see a list of partitions that will be flashed on your tablet. You can uncheck any partition that you don't want to flash. Then, click on the Download button and wait for the flashing process to complete. Do not disconnect or power off your tablet during this process.
Once the flashing process is done, you will see a green tick mark on the SP Flash Tool window. You can then disconnect your tablet from your computer and power it on. You have successfully flashed or installed the stock firmware on your Wolder Mitab Diamond tablet.
Conclusion
In this article, we have shown you how to download and install the driver for your Wolder Mitab Diamond tablet on your Windows computer. We have also provided you with the link to the stock firmware ROM for your tablet, in case you need to restore or update your device. We hope this article was helpful and informative for you. 061ffe29dd