Samsung Clone Note8 N9500 Flash File MT6580 7.0 Firmware Tested !!BETTER!!
DOWNLOAD === https://bltlly.com/2tyXyV
How to Flash Samsung Clone Note8 N9500 with MT6580 7.0 Firmware
If you have a Samsung Clone Note8 N9500 device and you want to upgrade or downgrade its firmware, you need to flash it with the appropriate flash file. Flashing is a process of installing a new software on your device, which can fix various issues such as bootloop, lag, virus infection, etc. In this article, we will show you how to flash Samsung Clone Note8 N9500 with MT6580 7.0 firmware using a flash tool and a USB driver.
What is Samsung Clone Note8 N9500
Samsung Clone Note8 N9500 is a replica of the original Samsung Galaxy Note 8 SM-N9500, which is a flagship smartphone released in 2017. The clone device has a similar design and features as the original one, but it runs on a different chipset and operating system. The clone device has a MediaTek MT6580 processor and Android 7.0 Nougat OS, while the original one has a Qualcomm Snapdragon 835 or Exynos 8895 processor and Android 9.0 Pie OS.
What is MT6580 7.0 Firmware
MT6580 7.0 firmware is a custom ROM based on Android 7.0 Nougat that is compatible with devices that have a MediaTek MT6580 chipset. This firmware can improve the performance and stability of your device, as well as add some new features and customization options. However, flashing this firmware may also void your warranty and erase your data, so make sure you backup your important files before proceeding.
How to Flash Samsung Clone Note8 N9500 with MT6580 7.0 Firmware
To flash Samsung Clone Note8 N9500 with MT6580 7.0 firmware, you need to download the following files:
The flash file (ROM) for Samsung Clone Note8 N9500 with MT6580 7.0 firmware. You can find the official link to download it on this page[^1^]. The file comes in a zip package that contains the flash file, flash tool, USB driver, and how-to flash manual.
The flash tool (SP Flash Tool) for flashing MediaTek devices. You can download it from this link[^2^]. The tool allows you to flash scatter-based firmware on your device.
The USB driver (MTK USB Driver) for connecting your device to your computer. You can download it from this link. The driver enables your computer to recognize your device when it is connected via USB cable.
After downloading the files, follow these steps to flash your device:
Extract the zip package of the flash file on your computer and open the folder.
Run the flash tool as administrator and click on the \"Download\" tab.
Click on the \"Choose\" button and select the scatter file (MT6580_Android_scatter.txt) from the flash file folder.
Make sure that only \"Download Only\" option is selected in the drop-down menu.
Turn off your device and remove the battery (if removable).
Connect your device to your computer via USB cable while holding the volume down or volume up button (depending on your device).
The flash tool will detect your device and start flashing automatically.
Wait until you see a green tick mark indicating that the flashing is completed.
Disconnect your device and insert the battery (if removable).
Reboot your device and enjoy the new firmware.
Conclusion
Flashing Samsung Clone Note8 N9500 with MT6580 7.0 firmware can be done easily with the help of a flash tool and a USB driver. However, you should be careful and follow the instructions carefully, as flashing can also cause some problems if done incorrectly. If you encounter any issues during or after flashing, you can ask for help on this forum. We hope this article was helpful for you. 061ffe29dd